Home Pricing  Gallery Contact Products
 GIVE-AWAY
Orders Specials Dealer Links
    
Google+
Badlands Electronic  Modules Taillights Lighting Kits Directional Mirrors Cleaning Products Accessories Billet
LED Turn Signals License Plate Frames / Side Mount Digital Mirrors Tank Mount Kits Dressers Risers
License Plate Frames & Side Mounts

Black Hills Billet
 NEW “AXLE SIDE MOUNT” FOR RIGID FRAMES

Black Hills Billet New Axel Side Mount for Rigid Frames

So the Boss came across a deal he couldn’t pass up on a rolling chassis. Problem was, the frame was already powder coated. We make license plate side mounts, but the only ones for a rigid frame required welding. Until now! So for you “young guys” that have a rigid, where the axle-spacer adjuster tightens the chain, this mount will solve your problem of where to hang the dreaded license plate! This mount comes in Chrome or Satin Black Powder Coat. It will accept any of our Folding / Non Folding Side Mount Backing Plate Assemblies, available with plate light only, or with several tail light options.

Black Hills Billet New Axel Side Mount for Rigid Frames


ASM-01-C
AXLE SIDE MOUNT - CHROME W- SPEED HOLES
ASM-01-B
AXLE SIDE MOUNT – BLACK SATIN POWDER COAT – SPEED HOLE
ASM-02-C
AXLE SIDE MOUNT - CHROME ONLY – WRENCH STYLE

Rigid Hardtail Wrench Billet Side Axel Mount for License Plate


FOLD AWAY SIDE MOUNT HINGE & BACKING PLATE LICENSE
  -To use our full system 1st pick out your
    AXEL SIDE MOUNT, FOLDING SIDE MOUNT or NON-FOLDING SIDE MOUNT
     then scroll down and pick your backing plate.

Did you know running a Side Mount vertically rather than horizontally is now a
ticketable offence?

That's why we never caved in
to pressure to build ours in a vertical design, I had heard this was coming.

Here in Nevada a friend just got a $230 ticket and Daytona will be issuing a $1,000 ticket for vertical plates,
really ! ! !

A common use for this trick little item is to keep passersby from bonking their shins on your custom side mounted license plate. All components are machined from 6061 and 7075 billet aluminum and chrome plated. Three kits available: Softail's, Swing Arm Motorcycles, and a Weld On Tab for custom applications. Combined with any of our backing plates listed and you have one the finest and certainly the most heavy duty side mounted license plate on the market today. Concept by Ron Rupp, manufactured by Black Hills Billet.


FOLDING SIDE MOUNT - HINGE ONLY

 

FSM-01-C Fits 1986 thru 1999 Softails with 3/4” axle, left side kit in photo.

FSM-01-A-C Fits 2000 thru 2007 Softails, with 3/4 axle, left side photo also but with thinner mounting bracket as pictured.

FSM-01-B-C Fits late 2007 & 2008 with 1” axle, left side photo also but with thinner mounting bracket & 1" axel hole.

FSM-02-C Swing Arm lower shower shock bolt as pictured in photo below with Cateye tail light.

FSM-02-V-ROD Folding Side Mount for V-ROD, mounts also to lower shock bolt but comes with special stud with metric threads on one side.

FSM-03-C Weld on Tab, right side of photo.

FSM-01-C-BC Black Mount / Chrome Hinge
Fits Late 2008 to Present

FSM-01-C-BB
Black Mount / Black Hinge
Fits Late 2008 to Present


Black Hills Billet has designed a new 1/4" Steel Mount, Heli-Arc Welded to our new axel spacer (See Arrow in photo on Right)  that sits between the Swing Arm & Pulley. This attaches to our Folding Hinge that accepts either our LED Plate Illumination Only Frame, Cat-Eye or Radiantz Oval. See Below.  

 


Black Hills Billet
NEW NON-FOLDING SIDE MOUNT
FOR NIGHTSTER, DYNA, V-ROD & SWING ARM MOTORCYCLES USING A STANDARD ½” SHOCK BOLT.

Not liking the factory side mount thingy on your new Nightster, Dyna or V-Rod? We have designed a mount that attaches to the lower shock bolt. Then choose one of our four styles of backing plates, which bolts on and follows the line of the shock for a clean, tucked in look. Also fits any other model using a ½” shock bolt, for those who desire to relocate their plate frame. 

NFSM-04-C : FOR V-RODS

NFSM-05-C : FOR NIGHTSTERS, DYNAS / UNIVERSAL SWING ARM WITH A 1/2 BOLT

FITMENT (½” SHOCK BOLT)


For a Black finish, replace the C with B at the end of part number.

Now that you have selected your bikes mounting bracket, please choose the desired backing plates from above. Complete side mount system is the combination, shock mount AND backing plate / frame assembly. Most popular backing plate is FBP-04-L-x (x either "C" or "B"), as seen to the right and below.

 

 


ALL 4 BACKING PLATE ASSEMBLIES FIT, ALL THE ABOVE 3 DIFFERENT STYLE: AXLE SIDE MOUNT, FOLDING SIDE MOUNT & NON-FOLDING
SIDE MOUNT

BACKING PLATES

For Cat Eye taillight or Arlen Ness Custom Cat Eye. Taillight sold separately, comes with billet license plate frame and chrome fasteners.

PART #:   FBP-01-L-C
Left Hand Side Mount/Chrome


For Black : FBP-01-L-B

 


For Radiantz LED Oval Taillight with LED license plate illumination. Taillight sold separately, comes with billet license plate frame and chrome button head screw kit.


PART #: FBP-02-L-C
Left Hand Side Mount/Chrome

For Black : FBP-02- L-B

 

Radiantz Super Thin LED Light Bar Led Illumination, comes with Radiantz Super Thin Light Bar Backing plate, billet license plate frame and chrome button head screw kit.


PART #: FBP-04-L-C
Left Hand Side Mount/Chrome

For Black : FBP-04-L-B


1928 Ford Taillight Side Mount

`

Our newest Side Mount Backing Plate Assembly comes with this Retro 1928 Ford Taillight. This assembly fits either our Folding Side Mount Hinge or our Non Folding Mount for Swing Arm Bikes. Choose from super bright LED, where both top and bottom sections are illuminated, or an old fashion Incandescent light bulb, where only the bottom does run, and the top portion comes on for brake. Both styles of lights come with license plate illumination window. You can also choose this assembly in chrome or in black finish. Includes backing plate, license plate frame, light and hardware.

FBP-05-C-LED CHROME WITH LED LIGHT

FBP-05-C-STOP CHROME WITH INCANDESCENT LIGHT, "STOP"

FBP-05-B-LED BLACK WITH LED LIGHT

FBP-05-B-STOP BLACK WITH INCANDESCENT LIGHT, "STOP"

 


Black Hills Billet
New 3rd Brake Light Plate Frame

 

If you have a new Street Glide, Road Glide or CVO, you are probably not happy with the amount of light you have on your rear end. Ah… the bikes rear end! Black Hills has solved that problem for you with this super thin billet aluminum, 3rd Brake Light. This plate is the only aftermarket frame thin enough to fit up under your light bar, on the factory plate holder, with no modifications . The light sets recessed into a machine groove (not on top), and has 45 super bright Radiantz LED’s to get the attention of those inattentive drivers. This can easily be wired into the taillight harness, accessible behind the right side saddle bag. Or with the Badlands Intensifier converter, it can be Run & Brake. This comes in Chrome or Satin Black for the frame, Smoke Tube or Red Tube for the light, with Red LED’s. Don’t get rear ended!

 

• Designed for all Street/Road/CVO Glides w/o center taillight
• Can be used universally and fits any standard plate holder
• Simple 2 wire light, soldiers in easily behind saddle bag
• Add Intensifier for Run & Brake functions

LPF-3RD-C-R Chrome Plate Frame – Red Z-Flex
LPF-3RD-C-S Chrome Plate Frame – Smoke Z-Flex
LPF-3RD-B-R Black Powder Coat – Red Z-Flex
LPF-3RD-B-S Black Powder Coat – Smoke Z-Flex

 


Sequential Turn Signal Plate Frame  

Plate frames for 4 x 7 inch plate come in chrome or black powder coat. Available with red or yellow sequential or red non-sequential. Also available is white plate light that is hidden in the plate when installed.
Chrome Frames             
Red sequential            
P/N: STSPR              


Yellow sequential     
P/N: STSPY              

Red non-sequential            
P/N: NSTSPR       

 

Black Frames
Red sequential
P/N: STSPR-B

Yellow sequential
P/N: STSPY-B

Red non-sequential
P/N: NSTSPR-B

 

Use our Illuminator with non-sequential plate frame and plate light and have run, brake, turn, flashers and plate light all in the plate frame.

New white plate light sold separately, mounts inside frame

PART #: LPL-2


 

"Whiskers" LED License Plate Frames  

"Whiskers" License Plate Frame with new super bright RADIANTZ LED strip lighting
and redesigned "no see em's" clear lenses.

Chrome plated or black powder coated, milled from 6061 Billet aluminum assembled with the WHISKERS style lenses and LED lighting in Red, Amber or Red that Turns Amber when the turn signals are activated. With the Red that Turns to Amber, you can have either Run and Turn or Brake and Turn. You can run the Red LED's and our Illuminator for Run, Brake and Turn Signals. Unlike others on the market, you can see these RADIANTZ LED's a mile away. Comes with our new "No See Em's" clear lenses that blend into our beautiful chrome plating. Install this Plate frame and keep your signals off the fender struts for that uncluttered look; Or if you are installing Saddle Bags, this will relocate your turn signals to the OEM plate location. - And if you have a Badlands Frame with the old style halogen lights - we offer a LED Retro Fit Kit (below) and you too can benefit from state of the art lighting.
(Fits: 7 1/8" X 4 1/16" License Plates)

PART #:  LTS-01-LA        Amber LED

PART #:  LTS-01-LR             Red LED 

PART #:  LTS-01-LRA     Red to Amber

PART #:  LTS-02-LA   Amber LED

PART #:  LTS-02-LR     Red LED

PART #:  LTS-02-LRA    Red to Amber


Halogen bulbs made our turn signals the brightest signals on the market in their day, but LEDs have surpassed the halogen bulb by 3 times in brightness. Now you can retro fit your whiskers license plate frame with the same LED strips from RADIANTZ that we have switched to in our new whiskers license plate frame. Simple to install and unbelievably bright, everything you will need to make the switch is included in this great kit! They come in amber, red or red for running or brake that goes amber with activation of turn signal button. Also comes with our new “no see em's” redesigned clear lenses.
     PART #:  WRLK-A                AMBER 
     PART #:  WRLK-R                RED  

     PART #:  WRLK-R-A            RED TO AMBER   
 

Hey Kids, our Retro Fit Kit fits you Arlen Ness License Plate frame too!
Use the same Kit that the “Whiskers” use to give you more visibility.
Can you tell which side has the Led Retro Fit LEDs in it?

PART #: NESS-A  Amber   -    PART #: NESS-R  Red      -    PART #: NESS-R-A  Red to Amber 


TURN SIGNALS ACCESSORIES

Compliment your bike with our custom trim plate, backing plate, and tilt back mounting plates that match the contour of your new turn signal assembly. We also offer a hardware kit with the correct size chrome allens and acorns to properly mount your new turn signal assembly.

PART #:  BP-01 Backing Plate/Vertical Lamp
PART #:  BP-02 Backing Plate/Horizontal Lamp
PART #:  TBM-01 Tilt Back Mount/Vertical Lamp includes backing plate
PART #:  TBM-02 Tilt Back Mount/Horizontal Lamp includes backing plate
PART #:  HK-01 Hardware Kit


TILT BACK LIGHTED LICENSE PLATE FRAME

This unique billet license plate frame is illuminated for the custom bike builder who desires to French-in a trick taillight or run a custom taillight without license plate illumination. Milled from 6061 aluminum this chrome unit will add a touch of class to any custom bike. This assembly includes our backing plate, rubber block with hardware, custom light housing and license plate frame with chrome button head and acorn fasteners.

License Plate Frames

PART #:  LLPF-02-C  (chrome)
PART #:  LLPF-02-B 
(black)
 Tilt Back Lighted License Plate Frame Assembly

PART #:   LPF-01-C
  (chrome)
PART #:   LPF-01-B 
(black)
 Tilt Back License Plate Assembly

 

PART #:   LPF-02-C  (chrome)
PART #:   LPF-02-B 
(black)
 License Plate Frame and Hardware ONLY/ Chrome

(Plain plate frame, no light.)

 

PART #:   LLPF-03-C  (chrome)
PART #:   LLPF-03-B 
(black)

LIGHTED License Plate Frame Assembly ONLY

(No backing plate)

 

 

 

 

 

Web design by
Mike Marcum

Black Hills Billet
1554 Linda Way Sparks, NV 89431
775-359-4446 Voice  775-359-4443 Fax
Copyright © 2001-2014
Email
BlackHillsRick@Gmail.com

Looking to print this page?
Click here for Print Help